The part finder is meant to make it easier to find a specific part but is not a complete list of the machines parts. To look through a machines complete part list, please click on your machine from the home page.
MC-Max Seamer head
-
-
#2 Flexible Motor Coupler
Find your part hereThis motor coupler connects the motor to the chuck shaft.
-
#3 Seamer Bearing
Find your part hereThis bearing ensures that the chuck spins smoothly and concentric.
-
#3 Tapered Roller Bearing
Find your part hereComes with races to fully refresh your chuck bearings. We recommend buying two.
-
#4 Chuck Shaft
Find your part hereThis chuck shaft attaches to the chuck and leads back to the seamer motor. Having a smooth and concentric shaft is vital to ensure a quality seam.
-
#5 Operation Cylinder
Find your part hereThis air cylinder connects the the operation arm and drives the operations into the chuck.
-
#6 Cap in Place Sensor
Find your part hereMounted on the foam rail, this sensor detects when a lid is in place on top of a can.
-
-
#8 Can In Place
Find your part hereThis sensor detects when a can is in position on the seamer lift puck.
-
#9 Lift Puck
Find your part hereThe lift puck is essential to lifting cans up straight and aligned to the chuck.
-
-
#11 Lift Puck Cylinder
Find your part hereThe cylinder that connects to the seamer lift puck assembly.
-
-
-
Sealed Bearing Kit
Find your part hereThis replacement kit will allow you to refresh your chuck bearings. It includes two bearings, a chuck shaft and the screw to mount and secure your chuck to the shaft.
-
Tapered Roller Bearing Kit
Find your part hereThis replacement kit will allow you to refresh your chuck bearings. It includes two bearings, a chuck shaft and the screw to mount and secure your chuck to the shaft.
Max Cap Shedder
Max Filler Head
-
-
-
-
-
#5 Filler Ready Sensor
Find your part hereSensor that detects when the last can has entered the filler area.
-
#6 Gate Cylinder
Find your part hereThis is the cylinder that is used to control the cans going in and out of the filler area, as well as the filler and seamer split cylinders.
-
CO2 Valve
Find your part hereThis valve controls when CO2 is dispensed. There is one for the can purge and one for under cap gas.
MC-MAX Control Panel
-
#1 Safety Relay
Find your part hereThe safety relay is responsible for providing safe power to the panel and shutting power off to select systems when e-stopped.
-
#2 Panel Breaker
Find your part hereThis component will stop power flow in the event of a short going into the panel.
-
-
#4 PLC Control Unit
Find your part hereThe PLC is considered the "brain" of the machine. For programming instructions, please contact a Microcanner Technician
-
-
-
-
-
